2017 Schulte XH-1500 Series 4 Industrial Grade Cutter

Call for Price

XH-1500 Series 4 Industrial Grade Cutter



    Key Features
    • New, extra heavy duty, high horsepower Bondioli gearboxes with new oil level sight glass and 1-3/4" input shafts and 3" (75mm) output shaft
    • New extra heavy duty Bondioli G8 drive lines
    • New high-torque wing clutches ensure better performance in rough cutting
    • Fitted with replaceable spring steel bushings at all major pivot locations to increase the ease of maintenance and life of the machine. New locations include the pivot points on the hitch, tension links, center suspension, wing suspension and all wheel standards.
    • Tandem walking axles result in smooth operation over rough surfaces
    • Single domed, sweep clean deck design eliminates excess weight over competitive double-deck designs, eliminates build up of debris and prevents rusting on top side of deck
    • A deep cutting chamber coupled with high blade tip speeds result in a superior cut & unsurpassed material flow
    • Lower pressure 8" stroke hydraulic phasing cylinders for a level lift
    • 24" severe duty tires, transport height is increased to 17.5" along with improved performance in wet conditions
    • Low maintenance CV Tractor Shaft or Patented 540rpm Equal Angle Hitch available
    • Serviceable, bolt on hitch swivel
    • Center suspension reduces stress on tractor drawbar
    • 3/8" thick formed deck protection rings prevent blade to deck contact
    • Double safety chains with individually replaceable links are standard equipment
    • Cutting width: 180 in. (4.57m)
    • Overall width: 190 in. (4.83m)
    • Overall length: 192 in. (4.88m)
    • Transport width: min 88 in. (2.24m)
    • Transport height: 88 in. (2.24m)
    • Deck thickness: 7GA (3/16 in.) (4.6mm)
    • Weight, approx.: 5800 lb. (2636kg)
    • Hitch weight, approx.: 1900 lb. (864kg)
    • Minimum tractor HP: 65 HP (52kW)
    • Recommended tractor HP: 85 HP (67kW)
    • Cutting height: 1.5 to 17.5 in. (38 to 456mm)
    • Ground clearance: 17.5 in. (444mm) (with 24 in. tire)
    • Cutting capacity: 4 in. material (102mm)
    • Blade overlap: 6.5 in. (165mm)
    • Divider gearbox rating: 260 HP (194kW)
    • Centre/wing gearbox rating: 210 HP (157kW)
    • Blade tip speed: 540 RPM
    • Centre: 850 RPM, 15,743 ft./min (4884m/min)
    • Wing: 1002 RPM, 16,022 ft./min (4798m/min)
    • Wing working range: 25 deg. down to 90 deg. up



    Working Width
    180 in. (4.57m)
    190 in. (4.83m)
    192 in. (4.88m)
    5800 lb. (2636kg)

    Related Products